Adjusting the Sound
Press the (sound) button, and
rotate
to adjust the setting.
Each time you press the button, a
sound
mode switches as follows.
When the adjustment level reaches the center, you
will ...
Headliner Removal/Installation (General information)
Special Tools Required
KTC Trim Tool Set SOJATP2014
*Available through the Honda Tool and Equipment Program; call 888-424-6857
SRS components are located in this area. Review the SRS ...
Driveshaft Installatio
NOTE: Before starting installation, make sure the mating surfaces of the
joint and the splined section are clean.
Apply about 5 g (0.18 oz) moly 60 paste (P/N 08734-0001) to the contact
ar ...