SRS components are located in this area. Review the SRS component locations and the precautions and procedures.
NOTE: Do not damage or drop the combination switch as the steering angle sensor is sensitive to shock and vibration.
With the wheels in the straight ahead position and the steering wheel centered, remove the steering wheel.
Remove the steering column covers and the cable reel.
Remove the combination switch assembly.
Remove the combination light switch (A) and the wiper/washer switch (B) from the combination switch body assembly (C).
Install the combination switch body assembly in the reverse order of removal.
NOTE:
Do not remove the steering angle sensor from the combination switch body.
When installing the cable reel, set the turn signal canceling sleeve position so that the arrow points straight up.
Tighten the combination switch assembly/cable reel mounting screw in the proper sequence.
Place Phone Number
DEST button
►DEST Menu 2►Place Phone Number
Select a destination by phone number. Only phone numbers in the database are
recognized.
1. Enter the area code and phone
number. Select ...
Front Passenger's Weight Sensor Replacement (Part-1)
Removal
NOTE: .
Removal of the front passenger's weight sensors must be
done according to precautions and procedures.
The front passenger's weight sensor are part of the ...
Avoiding Streets
DEST button (when en route)
►Avoid Streets
Select a street or streets along your route to avoid.
1. Select the street you want to avoid.
► Repeat the procedure to avoid
other ...