Pilot Bearing Replacement
Remove the crankshaft pilot bearing (A) using the remover weight (B), and
the 15 mm bearing remover shaft set (C).
Install a new pilot bearing (A) into the crankshaft using th ...
Driver's Seat Position Sensor Replacement
Removal
NOTE: Do not turn the ignition switch to ON (II), and do not connect the
battery cable while removing the driver's seat position sensor.
Do the battery terminal disconnection ...
Drive Belt Auto-Tensioner Inspection
Turn the ignition switch to ON (II), and make sure to turn the A/C switch
OFF, then turn the ignition switch to LOCK (0).
Check the position of the auto-tensioner indicator (A). S ...