Honda Fit: Inspection
-
Install the flange nut on the damper shaft end, and set the socket wrench and T-handle on the nut.
-
Compress the damper assembly by hand, and check for smooth operation through a full stroke, both compression and extension. The damper should extend smoothly and constantly when compression is released. If it does not, the gas is leaking and the damper should be replaced.
-
Check for oil leaks, abnormal noises, and binding during these tests.
See also:
Driver's Seat Position Sensor Operation Check
Check the driver's seat position sensor after the driver's seat position
sensor replacement.
Make sure the driver's seat is all the way forward position.
Make sure the ...
Clutch Replacement (M/T)
Special Tools Required
Clutch Alignment Disc 07JAF-PM7011A
Clutch Alignment Shaft 07JAF-PM7012A
Clutch Alignment Shaft 07ZAF-PR8A100
Ring Gear Holder 07LAB-PV00100
Weight, Remover 07741-0010 ...
Tire Labeling
The tires that came on your vehicle have a number of markings. Those you should
be aware of are described below.
Tire Size
Whenever tires are replaced, they should be replaced with tires of the ...
Categories
