Honda Fit: Inspection
-
Install the nut on the damper shaft end, and set the socket wrench and T-handle on the nut.
-
Compress the damper assembly by hand, and check for smooth operation through a full stroke, both compression and extension. The damper should extend smoothly and constantly when compression is released. If it does not, the gas is leaking and the damper should be replaced.
-
Check for oil leaks, abnormal noises, and binding during these tests.
See also:
Engine Coolant
Specified coolant: Honda Long Life Antifreeze/Coolant Type 2
This coolant is premixed with 50% antifreeze and 50% water. Do not add any
straight antifreeze or water.
We recommend you check the en ...
Under-Dash Fuse/Relay Box Removal and Installation (Canada models)
Canada models
NOTE: SRS components are located in this area.
Review the SRS component locations, and
precautions and procedures
before doing repairs or servicing.
Removal
NOTE: The ...
Find Place Commands
Find nearest (specify place):
Auto service center
ACURA dealers
HONDA dealers
Gas station
Hydrogen station
Auto parts & electronics shop
Auto repair & maintenance shop
Car wash & d ...
Categories
