Honda Fit manuals

Honda Fit: Removal (Part -3)

  1. Remove the secondary HO2S harness bracket (A) from the steering gearbox.

    NOTE: Do not disconnect the secondary HO2S 4P connector and the secondary HO2S.

  2. @font-face{font-family: "Honda_SymbolMarkeng";src:url(/statics/ho_prod_2/txt/Honda_SymbolMark_enu3.txt);}@font-face{font-family: "Honda_Special_Symbols";src:url(/statics/ho_prod_2/txt/Honda_Special_Symbols2.txt);} 6 x 1.0 mmA
  3. Remove the splash shield.

  1. Remove the lower torque rod (A).

  2. @font-face{font-family: "Honda_SymbolMarkeng";src:url(/statics/ho_prod_2/txt/Honda_SymbolMark_enu3.txt);}@font-face{font-family: "Honda_Special_Symbols";src:url(/statics/ho_prod_2/txt/Honda_Special_Symbols2.txt);} AM/T14 x 1.5 mmReplace.A/T12 x 1.25 mmReplace.14 x 1.5 mmReplace.14 x 1.5 mmReplace.
  1. Attach a transmission jack (A) to the middle of the front subframe (B), and support the front subframe securely by raising the transmission jack.

  2. @font-face{font-family: "Honda_SymbolMarkeng";src:url(/statics/ho_prod_2/txt/Honda_SymbolMark_enu3.txt);}@font-face{font-family: "Honda_Special_Symbols";src:url(/statics/ho_prod_2/txt/Honda_Special_Symbols2.txt);} C14 x 1.5 mmReplace.AC14 x 1.5 mmReplace.B
  3. Remove the front subframe mounting bolts (C).

  4. Lower the front subframe and steering gearbox as an assembly by lowering the jack slowly.

  1. Remove the steering gearbox (A) from the front subframe (B).

  2. @font-face{font-family: "Honda_SymbolMarkeng";src:url(/statics/ho_prod_2/txt/Honda_SymbolMark_enu3.txt);}@font-face{font-family: "Honda_Special_Symbols";src:url(/statics/ho_prod_2/txt/Honda_Special_Symbols2.txt);} 10 x 1.25 mmReplace.AB10 x 1.25 mmReplace.10 x 1.25 mmReplace.10 x 1.25 mmReplace.10 x 1.25 mmReplace.
  1. Remove the pinion shaft grommet (A).

  2. @font-face{font-family: "Honda_SymbolMarkeng";src:url(/statics/ho_prod_2/txt/Honda_SymbolMark_enu3.txt);}@font-face{font-family: "Honda_Special_Symbols";src:url(/statics/ho_prod_2/txt/Honda_Special_Symbols2.txt);} A

 

See also:

Childproof Door Locks
The childproof door locks prevent the rear doors from being opened from the inside regardless of the position of the lock tab. To open the door from the inside when the childproof door lock is on ...

Radiator Replacement
Raise the vehicle on the lift. Drain the engine coolant. Disconnect the ECT sensor 2 connector (A), then remove the harness clamp (B). With A/C: Re ...

Fluid Locations
...

© 2024 Copyright www.hfitinfo.com