Honda Fit: Power Door Mirrors
You can adjust the door mirrors when the
ignition switch is in ON 
.
■ Mirror position adjustment
L/R selector switch:
Select the left or right mirror. After adjusting the mirror, return the switch to the center position.
Mirror position adjustment switch:
Press the switch left, right, up, or down to move the mirror.
See also:
Crankshaft Main Bearing Replacement
Main Bearing Clearance Inspection
Remove the bearing cap bridge, the main bearing caps, and main bearing
halves.
Clean each main journal and main bearing half with a clean s ...
Ignition Switch
The ignition switch has four positions: LOCK (0), ACCESSORY (I), ON (II), and
START (III).
LOCK (0) - You can insert or remove the key only in this position.
To turn the key, push it in slightly ...
Center Console Removal/Installation
Special Tools Required
KTC Trim Tool Set SOJATP2014
*Available through the Honda Tool and Equipment Program; call
888-424-6857
Click here for an interactive version of this procedure (M ...
Categories
