Honda Fit: Parking Brake Lever Replacement
-
Release the parking brake lever fully.
-
Remove the center console.
-
Disconnect the parking brake switch connector (A) from the parking brake switch (B).
-
Remove the parking brake lever mounting bolts (C).
-
Disconnect the parking brake cables (D) from the equalizer (E).
-
Remove the parking brake switch.
-
Install the parking brake lever in the reverse order of removal.
-
Adjust the parking brake.
See also:
Door Position Adjustment
NOTE: Check for a flush fit with the body, then check for equal gaps between
the front, rear, and bottom door edges and the body. Check that the door and body
edges are parallel.
Place the ...
Installation (Part -2)
Set the front subframe (A) with the steering gearbox on the transmission jack and support it.
@font-face{font-family:
"Honda_SymbolMarkeng";src:url( ...
As required by the FCC
1)This device complies with Part 15 of the
FCC Rules and Canadian RSS-210/RSSGen.
Operation is subject to the following
two conditions: (1) this device may not
cause harmful interference, and (2 ...
Categories
