Remove the master cylinder.
Inspect and note these items:
Before reassembling, check that all parts are free of dirt and other foreign particles.
Do not try to disassemble the master cylinder assembly. Replace the master cylinder assembly with a new part, if necessary.
Do not allow dirt or foreign matter to contaminate the brake fluid.
Install the master cylinder.
Temporarily Repairing a Flat Tire
Canadian models with automatic transmission
If the tire has a large cut or is otherwise severely damaged, you will need
to have the
vehicle towed. If the tire only has a small puncture, from a nai ...
Hands Free Link Control Unit Input Test/Replacement
With navigation
Remove the driver's dashboard undercover.
Disconnect the 32P connector (A) from the HandsFreeLink control unit (B).
Inspect the connector and so ...
Seat Belt Inspection
Regularly check the condition of your seat belts as follows:
• Pull each belt out fully, and look for frays, cuts, burns, and wear.
• Check that the latches work smoothly and the belts retract e ...