Honda Fit: Front Brake Hose Replacement
-
Raise and support the vehicle.
-
Remove the front wheel.
-
Disconnect the brake line (A) from the brake hose (B), then remove the brake hose bracket (C).
-
Remove the banjo bolt (A), and disconnect the brake hose (B) from the caliper (C).
-
Remove the brake hose mounting bolt (D), then remove the brake hose.
-
Install the brake hose (A) with the mounting bolt (B).
-
Connect the brake hose to the caliper with the banjo bolt (C) and new sealing washers (D).
-
Install the brake hose bracket (A) to the body, then connect the brake line (B). Do not twist the brake hose.
-
After installing the brake hose, bleed the brake system.
-
Do the following checks:
-
Check the brake hose and line joint for leaks, and tighten if necessary.
-
Check the brake hoses for interference and twisting.
-
-
Clean the mating surfaces between the brake disc and the inside of the wheel, then install the front wheel.
See also:
TPMS System Description (USA models)
TPMS Control Unit Inputs and Outputs at the
20P Connector
@font-face{font-family:
"Honda_SymbolMarkeng";src:url(/statics/ho_prod_2/txt/Honda_SymbolM ...
If the TPMS Indicator Comes
U.S. models
■ Reasons for the indicator to come on
• Comes on when there is a problem with the TPMS.
• If the compact spare is installed, the indicator comes on after driving
for a few ...
ODS Unit Replacement
Removal
Do the battery terminal disconnection procedure,
then wait at least 3 minutes before starting work.
Disconnect the passenger's side airbag harness 2P connector. ...
Categories
