Honda Fit manuals

Honda Fit: Front Brake Caliper Overhaul

caution

Frequent inhalation of brake pad dust, regardless of material composition, could be hazardous to your health.

  • Avoid breathing dust particles.

  • Never use an air hose or brush to clean brake assemblies. Use an OSHA-approved vacuum cleaner.

notice

Do not spill brake fluid on the vehicle; it may damage the paint; if brake fluid gets on the paint, wash it off immediately with water.

Remove, disassemble, inspect, reassemble, and install the caliper, and note these items:

CALIPER PIN BPISTON BOOTReplace.PISTON SEALReplace.8 x 1.0 mm 23 N·m (2.3kgf·m, 17lbf·ft)BANJO BOLT34 N·m (3.5 kgf·m, 25 lbf·ft)BRAKE HOSE12 x 1.25 mm 108 N·m (11.0 kgf·m, 80 lbf·ft)PIN BOOTReplace.CALIPER PINPAD RETAINERSCALIPER PIN A: Honda silicone grease (P/N 08C30-B0234M)SEALINGWASHERSReplace.BLEED SCREW8.5 N·m (0.87 kgf·m, 6.3 lbf·ft)WEAR INDICATORInstall inner pad withits wear indicator upward.INNER PAD SHIM BINNER PAD SHIM ABRAKE PADSOUTER PAD SHIMCALIPERBRACKETPAD RETURN SPRINGPISTON?????**: 09-11 models
See also:

Fuel Economy
Improving Fuel Economy Fuel economy depends on several conditions, including driving conditions, your driving habits, the condition of your vehicle, and loading. Depending on these and other co ...

Routing & Guidance
INFO button ► Setup ►Other ►Routing & Guidance Choose various settings that determine the navigation system functionality during route guidance. Select an item. The fo ...

Accessories
When installing accessories, check the following: • Do not install accessories on the windshield. They can obstruct your view and delay your reaction to driving conditions. • Do not install acc ...

© 2024 Copyright www.hfitinfo.com