Honda Fit manuals

Honda Fit: Rear Seat Removal/Installation

NOTE:

  1. Lift both rear seat cushions up.

  1. Pull the rear seat belt buckles (A) and rear center seat belt detachable anchor (B) out through the elastic straps (C) on the seat cushions.

  2. Fastener Locations: Clip, 4BCA
  3. Remove the clips on the seat-back hinges. Place the seat belt buckles and the seat belt detachable anchor on the floor underneath the seat cushions.

  4. Fold both rear seat-backs.

  1. Lift up the cargo floor lids (A), and remove the bolts securing both rear seats.

  2. Fastener Locations: Bolt, 410 x 1.25 mm34 Nح (3.5 kgfح, 25 lbfئt)A
  1. Remove the right rear seat (A) and the left rear seat (B) through both rear door opening.

  2. BA
  3. Install the seats in the reverse order of removal, and note these items:

    • Push the clips into place securely.

    • After installing, fix the seat belt buckles and the detachable anchor with elastic straps on both seat cushions.

    • If the clips are damaged or stress-whitened, replace them with new ones.

See also:

Accessories
When installing accessories, check the following: • Do not install accessories on the windshield. They can obstruct your view and delay your reaction to driving conditions. • Do not install acc ...

Information Display
The information display shows the odometer, trip meter, engine oil life and maintenance service item codes, and other gauges. ■Switching the Display Press the  (select/reset) knob to c ...

Tire Sealant Removal
Canada models with 5-speed A/T NOTE: This procedure is only to be used with the temporary tire repair kit. The tire inflator and temporary repair sealant are used on vehicles withou ...

© 2024 Copyright www.hfitinfo.com