Honda Fit manuals

Honda Fit: Rear Seat Leg Guide Replacement

  1. Push the leg guide cover (A) to release the hook (B), then pull out the cover from the attaching plate (C) and the holder (D) of the leg guide (E).

  2. BACDE
  1. Remove the nut and bolt, then remove the leg guide (A).

  2. AFastener Locations: Nut, 1: Bolt, 18 x 1.25 mm22 Nح (2.2 kgfح, 16 lbfئt)
  3. Install the leg guide in the reverse order of removal.

See also:

Ball Joint Boot Inspection/Replacement
Special Tools Required Bearing Driver Attachment, 40 mm 07GAF-SE00200 Check the ball joint boot for weakness, damage, cracks, and grease leaks. NOTE: If the ball joint boot is ...

Parking
Always use the parking brake when you park your vehicle. Make sure the parking brake is set firmly, or your vehicle may roll if it is parked on an incline. If your vehicle has an automatic transmis ...

Handling the Unexpected
Flat Tire ● Park in a safe location and repair the flat tire with the compact spare tire*, or using the tire repair kit* in the cargo area. Indicators Come On ● Identify the indicat ...

© 2026 Copyright www.hfitinfo.com