Honda Fit: Rear Seat Control Cable Replacement
NOTE:
-
Take care not to tear or damage the seat covers.
-
Put on gloves to protect your hands.
-
Take care not to kink the cable.
-
The left rear seat is shown, the right rear seat is similar.
-
Remove the rear seat assembly.
-
Remove the rear seat cushion.
-
Remove the rear seat cushion cover/pad and the silencer.
-
Fold the leg, and remove the wire tie (A).
-
Disconnect the control cable (B) from the leg end (C) and cable bracket (D) of the seat cushion frame.
-
Install the cable in the reverse order of removal, and note these items:
-
Replace the wire tie you removed with a new one.
-
Make sure the control cable is routed properly and connected securely.
-
Install the new cable end in the same position as the original cable end. Check the rear seat for proper tip-up operation. If necessary, adjust the position of the cable end and recheck.
-
See also:
Spark Plug Inspection
Remove the ignition coils and the spark plugs.
Inspect the electrodes and the ceramic insulator:
Burned or worn electrodes may be caused by these conditions:
...
Playing a CD
Your audio system supports audio CDs, CD-Rs, and CD-RWs in either MP3 or WMA
format. With the CD loaded, press the CD button.
■How to Select a File from a Folder with the Selector Knob
(MP3 ...
Map Legend
MAP MENU (on map)
►Map Legend
See an overview of the map lines, areas, routes, and navigation icons.
Select an item.
► The system displays the map
legend.
A visual guide helps you ...
Categories
