Driver's seat: Pull out the side airbag harness (A) through the harness holes (B) in the seat-back pad (C) and the seat-back cover (D).
Pinch the tabs (A) on the end of the head restraint guides (B), and remove the guides from the seat-back.
Remove the seat-back cover/pad (A) from the seat-back frame (B).
Remove airbag attachment wire A from the outside reinforcing cloth (C), and remove airbag attachment wire B from the inside reinforcing cloth (D).
Install the cover in the reverse order of removal, and note these items:
Before installing the seat-back cover/pad, make sure airbag attachment wires A and B are installed correctly in the reinforcing cloths (C).
Reinstall airbag attachment wires A and B securely.
Use only original Honda replacement seat-back cover/pads.
Make sure the side airbag harness and the ODS unit harness (passenger's seat) are routed properly.
Your Vehicle at a Glance
* 1: To use the horn, press the center pad of the steering wheel.
* 2: If equipped. ...
Manual Transmission Removal (M/T)
Special Tools Required
Universal Lifting Eyelet 07AAK-SNAA120
1.8 Support Bolt 07AAK-SNAA500
Engine Support Hanger, A and Reds AAR-T1256
*: Reds engine support hanger AAR-T1256 is available th ...
Starting the Engine
1. Make sure the parking brake is applied.
Automatic transmission models
2. Check that the shift lever is in
, then
depress the brake pedal.
► Although it is possible to start the vehic ...