Honda Fit manuals

Honda Fit: Front Passenger's Weight Sensor Output Check After a Vehicle Collision

Second generation (2007-2024) / Honda Fit 2007-2024 Repair Manual / Body / Restraints / Restraints Control / Occupant Classification System / Front Passenger's Weight Sensor Output Check After a Vehicle Collision

NOTE: Check the front passenger's weight sensor output after this action:

Pre-Operation Check Set-up

  1. Drive the vehicle, accelerate to 20 mph (36 km/h), then stop on level ground.

  1. Make sure the ignition switch is in LOCK (0).

  1. Connect the HDS to the data link connector (DLC) (A).

  2. A
  3. Turn the ignition switch to ON (II).

  4. Make sure the HDS communicates with the vehicle and the SRS unit. If it does not communicate, go to the DLC circuit troubleshooting.

  5. From the HDS Main Menu, select SRS, then Inspection. In the Inspection Menu, select AFTER A VEHICLE COLLISION. Follow the prompts until the front passenger's weight sensor output check has been completed.

  6. Turn the ignition switch to LOCK (0).

  7. Disconnect the HDS from the DLC.

See also:

Gauges
Gauges include the speedometer, tachometer, fuel gauge, and related indicators. They are displayed when the ignition switch is in ON . ■Speedometer Displays your driving speed in mph (U. ...

Selecting a Child Seat
When buying a child seat, you need to choose either a conventional child seat, or one designed for use with the lower anchors and tethers for children (LATCH) system. Conventional child seats mus ...

Command Help
For “Command Help” menu items, all voice commands that are available for that system are listed. Select Read to hear the commands in the list read aloud. Voice Commands ...

© 2024 Copyright www.hfitinfo.com