Remove the instrument panel.
Disconnect the 13P connector from the power mirror switch (A).
Check for continuity between the terminals in each switch position according to the table.
Power Mirror Switch
If the continuity is not as specified, remove the screws and the covers and replacement the power mirror switch.
Install in the reverse order of removal.
HFT-Navigation Microphone Removal/Installation (With Navigation)
Remove the front individual map light lens (A) using a flat-tip
screwdriver.
@font-face{font-family:
"Honda_SymbolMarkeng ...
PCV Valve Inspection
Remove the harness holder (A).
Check the PCV valve (A), the hoses (B), the pipe (C), and the connections
for leaks or restrictions.
At idle, make sure there is ...
Using Voice Control
When you see in this manual,
voice commands are available for
that feature.
►Say the letter, number, or symbol (e.g., say
“A”).
Use spelling assist (e.g., say
“Alpha” ...