Honda Fit: Rearview Mirror Replacement
-
Release the hooks (A), then pull the mirror base cover (B) down.
-
Pull the hook (A) down to release it from the mount (B), and slide the mirror base (C) rearward, then remove the rearview mirror (D).
-
Install the mirror base cover on the mirror base securely.
-
Fit the mirror base (A) over the mount (B), and secure the rearview mirror with the spring (C) and hook (D).
See also:
Headliner Removal/Installation (General information)
Special Tools Required
KTC Trim Tool Set SOJATP2014
*Available through the Honda Tool and Equipment Program; call 888-424-6857
SRS components are located in this area. Review the SRS ...
VSA Off Switch Test/Replacement
NOTE: If the low tire pressure indicator turns ON, the VSA cannot be turned
OFF. Check the tire pressure first.
Turn the ignition switch to LOCK (0).
Remove the driver's da ...
Brake Light, Taillight, Back-Up Light and Rear Turn
Signal Light Bulbs
When replacing, use the following bulbs.
Brake/Taillight: 21/5 W
Back-Up Light: 16 W
Rear Turn Signal Light: 21 W (Amber)
1. Pry on the edge of the cover using a flat-tip
screwdriver to remove ...
Categories
