Honda Fit: Mirror Housing Cover Replacement
-
Remove the mirror holder.
-
From the mirror holder opening, release the tabs (A) of the mirror housing cover (B).
-
Release the hooks (C, D), then remove the mirror housing cover.
-
Install the mirror housing cover in the reverse order of removal.
See also:
Exhaust Pipe and Muffler Replacement
NOTE: Use new gaskets and self-locking nuts when reassembling.
...
A/T Housing Reverse Idler Gear Installation (A/T)
Lightly coat the reverse idler gear shaft (A), the needle bearing (B),
and new O-rings (C) with lithium grease.
Assemble the new O-rings and the needle bearing on the reverse ...
Parking Brake Inspection and Adjustment
Inspection
Pull the parking brake lever (A) with 196 N (20 kgf, 44.1 lbf)
of force to fully apply the parking brake. The parking brake lever should be
locked within the specif ...
Categories
