Honda Fit: Mirrors

See also:

Piston Installation
If the Crankshaft is Already Installed Set the crankshaft to bottom dead center (BDC) for each cylinder as its piston is installed. Remove the connecting rod caps, and check that ...

Starting the Engine
1. Make sure the parking brake is applied. Automatic transmission models 2. Check that the shift lever is in , then depress the brake pedal. ► Although it is possible to start the vehic ...

Mainshaft Disassembly, Inspection, and Reassembly (A/T)
Inspect the thrust needle bearings and the needle bearings for galling and rough movement. Inspect the splines for excessive wear and damage. Check the shaft bearing s ...