Honda Fit manuals

Honda Fit: Dashboard Vent Removal/Installation

Side Vent

Click here for an interactive version of this procedure (driver's, passenger's).

NOTE: Take care not to scratch the dashboard or its related parts.

  1. Pull the upper portion (A) of the side vent (B) toward you to release the hooks (C), then remove the side vent.

  2. Driver's side

    BCCCCA

    Passenger's side

    BCACC
  3. Install the side vent in the reverse order of removal, and push the hooks into place securely.


Center Vent

NOTE: Take care not to scratch the dashboard or its related parts.

  1. Remove these items:

    • Audio unit, without navigation system ('9-11 models)

    • Audio unit, without navigation system ('12-13 model)

    • Audio-navigation unit, with navigation system ('9-11 models)

    • Audio-navigation unit, with navigation system ('12-13 model)

  1. Remove the screws, then remove the center vent panel (A) from the center panel (B).

  2. Fastener Locations: Screw, 5ABCD
  3. Release the hooks (C), then remove the center vent (D) from the center vent panel.

  4. Install the center vent in the reverse order of removal, and push the hooks into place securely.

See also:

Fuel Pressure Regulator Replacement
Remove the fuel tank unit. Remove the reservoir (A). Remove the clip (B) and the ground wire (C), then remove the bracket (D). Remove the clip (E), then r ...

Lights
Headlight Aiming The headlights were properly aimed when your vehicle was new. If you regularly carry heavy items in the cargo area, readjustment may be required. Adjustments should be done by yo ...

Shift Solenoid Valve Removal and Installation (A/T)
NOTE: Do not hold the solenoid valve connector to remove and install the solenoid valve. Be sure to hold the solenoid valve body. Remove the mounting bolts, then remove the solenoid valves by ...

© 2022 Copyright www.hfitinfo.com