NOTE: Take care not to scratch the door or related parts.
Remove the door sash outer trim (A).
Remove the screw from inside the door.
Release the lower edge of the trim from the door glass outer weatherstrip (B).
Pull the trim up to release the hooks (C) from the door, then remove the trim.
Install the trim in the reverse order of removal.
Make sure that there is no clearance between the rear edge of the door glass outer weatherstrip and the trim.
Rear Stabilizer Bushing Replacement
Raise and support the vehicle.
Remove the stabilizer bushing (A) from the axle beam.
@font-face{font-family:
"Honda_SymbolMarkeng";src:url(/st ...
Changing the Route Preference
Change the route preference by selecting minimum or maximum driving methods.
1. Select MIN or MAX for each item.
2. Select OK.
The calculated route may not be the route you
would choose. For saf ...
Front Stabilizer Bar Replacement
Removal
Remove the front subframe.
Remove the steering gearbox from the front subframe.
Remove the flange bolts (A) and the bushing holders (B), then remove the
...