Honda Fit: Dashboard/Steering Hanger Beam Disassembly/Reassembly

See also:

Clutch Clearance Inspection (A/T)
Special Tools Required Clutch Compressor Attachment 07ZAE-PRP0100 Inspect the clutch piston, the discs, the plates, and the end-plate for wear and damage, and inspect the clutch wav ...

Alternator Disassembly (Page -3)
Install a new front bearing in the drive-end housing with a hammer, the driver handle, 15 x 135L (A), and the bearing driver attachment, 42 x 47 mm (B). @fo ...

ATF Filter Replacement (A/T)
Remove the air cleaner assembly. Disconnect the ATF cooler hoses (A) from the ATF filter (B). Remove the ATF filter holder (C). Remove the ATF filter, and ...