Honda Fit: Fuel Pump/Fuel Gauge Sending Unit Replacement
-
Remove the fuel tank unit.
-
Remove the fuel level sensor (fuel sending unit) (A) from the fuel tank unit (B).
-
Check these items before installing the fuel tank unit:
-
When connecting the wire harness, make sure the connection is secure and the connector (C) is firmly locked into place.
-
When installing the fuel gauge sending unit, make sure the connection is secure. Be careful not to bend or twist it excessively.
-
-
Install the parts in the reverse order of removal. When installing the fuel tank unit, align the marks on the unit and the fuel tank.
See also:
Language
INFO button
► Setup ►Other
►Language
Set the system language used on all screens. You can choose from three
languages:
English, Français (French), Español (Span ...
Removal (Part -1)
Do the battery terminal disconnection procedure.
Raise and support the vehicle.
Remove the front wheels.
Tilt the steering column all the way up and mov ...
Safety of Infants and Small Children
Protecting Infants
An infant must be properly restrained in a rear-facing, reclining child seat
until the
infant reaches the seat maker’s weight or height limit for the seat, and the
infant is ...
Categories
