Honda Fit: Passenger's Power Window Switch Replacement
NOTE: The illustration shows front passenger's power window switch.
-
Remove the door panel:
-
Front passenger's
-
Rear
-
-
Remove the screws and the grip base (A).
-
Open the switch panel (A) from the grip base.
-
Remove the screws and replace the passenger's power window switch (B).
-
Install the parts in the reverse order of removal.
See also:
Accessory Power Socket Test/Replacement
NOTE: If the accessory power socket does not work, check the No. 13 (20 A) fuse
in the under-dash fuse/relay box and ground (G502) first.
Remove the dashboard center lower trim.
...
Secondary Shaft 2nd Gear Axial Clearance Inspection (A/T)
Install the thrust needle bearing (A), the needle bearing (B), 2nd gear
(C), the thrust needle bearing (D), the 43 x 54.5 mm thrust washer (E), the
39 mm cotters (F), and the cotter retain ...
Wheel Runout Inspection
Raise and support the vehicle.
Check for a bent or deformed wheel.
Set up the dial gauge as shown, and measure the axial runout by turning
the wheel.
...
Categories
