Honda Fit manuals

Honda Fit: Power Windows System Description

Anti-pinch Power Window Operation

The system is composed of the power window control unit (built into the power window master switch) and the driver's power window motor.

The driver's power window motor incorporates a Hall IC unit (pulser) which generates pulses during the motor's operation and sends pulses to the power window control unit. As soon as the power window control unit detects a change in the pulse frequency from the Hall IC unit (pulser), the power window control unit makes the power window motor stop and reverse. This prevents pinching your hand or fingers during auto-up operation. The anti-pinch function does not work when the power window master switch is held in the closed position.

HALL IC UNIT (PULSER)MAGNETPOWER WINDOW MOTORPOWER WINDOWMASTER SWITCHSensorMAGNETICICNSPeriod ofpulsesPeriod of pulsesPosition when something is pinchedThreshold value for judgment of pinchingPeriod ofpulses
See also:

Washer Reservoir Replacement
Remove the front bumper. Disconnect the 2P connector (A) and tubes (B) from the washer motor (C) and the washer fluid level switch (Canada models). ...

Rear Seat Control Cable Replacement
NOTE: Take care not to tear or damage the seat covers. Put on gloves to protect your hands. Take care not to kink the cable. The left rear seat is shown, the right rear ...

Oil Check
We recommend that you check the engine oil level every time you refuel. Park the vehicle on level ground. Wait approximately three minutes after turning the engine off before you check the oi ...

© 2022 Copyright www.hfitinfo.com