Honda Fit: Passenger's Power Window Switch Replacement
NOTE: The illustration shows front passenger's power window switch.
-
Remove the door panel:
-
Front passenger's
-
Rear
-
-
Remove the screws and the grip base (A).
-
Open the switch panel (A) from the grip base.
-
Remove the screws and replace the passenger's power window switch (B).
-
Install the parts in the reverse order of removal.
See also:
Parking/Side Marker Light Bulbs
When replacing, use the following bulbs.
Parking/Side Marker Light: 3.8 W (Amber)
1. Turn the socket to the left and remove it.
2. Remove the old bulb and insert a new bulb ...
Tire Pressure Monitoring System (TPMS)
U.S. models only
Your vehicle is equipped with a tire pressure monitoring system (TPMS) that
turns on every time you start the engine and monitors the pressure in your tires
while driving.
Each ...
Installation (Part -3)
Remove the vinyl tape from the connectors.
Connect the EPS motor angle sensor 8P connector (A), torque sensor 6P connector (B) to the steering gearbox.
...
Categories
