Honda Fit: Rear Inner Fender Replacement
NOTE:
-
Put on gloves to protect your hands.
-
Take care not to scratch the body.
-
Remove the screws (A) and the clips (B, C), then remove the rear inner fender (D).
NOTE: To release the clips, pry up on the center pin at the notch (E).
-
Install the cover in the reverse order of removal, and note these items:
-
If the clips are damaged or stress-whitened, replace them with new ones.
-
Push the clips into place securely.
-
Left side
Right side
See also:
Parking Brake
To apply the parking brake, pull the lever up fully. To release it, pull up slightly,
push the button, and lower the lever. The parking brake indicator on the instrument
panel should go out when ...
Command Input
If the system does not understand a command or you wait too long to give a
command, it responds with “Pardon? No command was heard. Please press the talk
button and say a command.”
When you giv ...
Reverse Shift Fork Clearance Inspection (M/T)
Measure the clearance between the reverse idler gear (A) and the reverse
shift fork (B) with a feeler gauge (C). If the clearance is more than the
service limit, go to step 2.
...
Categories
