NOTE:
Put on gloves to protect your hands.
Take care not to scratch the body.
Remove the front inner fender as needed.
From the wheel arch, remove the clip and the maintenance plug (A).
Release the hooks (B) of the front fender fairing (C) from the holes in the front fender, and pull the fender fairing out, then remove it.
Install the fender fairing in the reverse order of removal, and note these items:
If the clips are damaged or stress-whitened, replace them with new ones.
Before installing the clips, make sure the hooks (A) of the front fender fairing (B) are installed into the holes (C) in the front fender securely.
Push the clip into place securely.
Engine Does Not Start
Checking the Engine
If the engine does not start, turn the ignition switch to START
and check the
starter.
If you must start the vehicle immediately, use an
assisting vehicle to jump start it. ...
Selecting Bluetooth® Audio Mode
1. Make sure that your phone is on,
paired, and linked to HFL.
2. Press the CD/AUX button until you
get to Bluetooth® Audio mode.
► A Bluetooth® message and icon
are displayed on ...
VSA® (Vehicle Stability Assist), aka ESC (Electronic Stability Control),
System
VSA® helps to stabilize the vehicle during cornering if the vehicle turns
more or less
than what was intended. It also assists in maintaining traction on slippery
surfaces.
It does so by regu ...