Canada Models Without Front Fog Lights
NOTE:
Put on gloves to protect your hands.
Take care not to scratch the front bumper.
Remove the front bumper.
Remove the clips and the hooks (A), then remove the lower front bumper grille cover (B) from the front bumper (C).
NOTE: To release the clips, pry up on the center pin at the notch (D).
Install the cover in the reverse order of removal, and note these items:
If the clips are damaged or stress-whitened, and replace them with new ones.
Push the clips and the hooks into place securely.
Audio Screen Control
AUDIO button (in iPod® mode)
Control the audio screen through the navigation system.
Select a track.
Select the menu tab to change
songs in the track list.
The following items are ava ...
Camshaft Inspection
Remove the camshaft sprocket.
Remove the rocker arm assembly, then disassemble the rocker arm.
Put the rocker shaft holder bridge on the cylinder head, then tight ...
Clutch Wave-Plate Phase Difference Inspection (A/T)
Place the clutch wave-plate (A) on a surface plate, and set a dial
indicator (B) on the wave-plate.
Find the bottom (C) of a phase difference of the wave-plate, zero the
di ...