Ball Joint Boot Inspection/Replacement
Special Tools Required
Bearing Driver Attachment, 40 mm 07GAF-SE00200
Check the ball joint boot for weakness, damage, cracks, and grease leaks.
NOTE:
If the ball joint boot is ...
Starting the Engine
1. Apply the parking brake.
2. In cold weather, turn off all
electrical accessories to reduce the drain on the battery.
3. Manual transmission:
Press the clutch pedal down all the way. The START ( ...
Pressure Plate Inspection and Removal
Remove the transmission.
Check the evenness of the height of the diaphragm spring fingers using
the clutch alignment disc (A), clutch alignment shaft (B), remover handle
(C ...