NOTE: When removing the emblems/stickers, take care not to scratch the body.
To remove the front ёH'' emblem, remove the front grille.
To remove the rear ёH'' emblem, remove the rear license trim.
Clean the body surface with a shop towel dampened in isopropyl alcohol. After cleaning, keep oil, grease, and water from getting on the surface.
Apply the emblems/sticker where shown. When installing the ULEV sticker on the inside surface of the left quarter glass, align the sticker with the edge of the glass mark as shown, then press the sticker into place, and remove the application tape.
After installing the front ёH'' emblem, reinstall the front grille.
After installing the rear ёH'' emblem, reinstall the rear license trim.
Handling the Unexpected
Flat Tire
● Park in a safe location and repair the flat
tire with the compact spare tire*, or using
the tire repair kit* in the cargo area.
Indicators Come On
● Identify the indicat ...
Installation
Install the damper rubber mount (A) onto the damper unit. Position the
damper assembly (B) between the body and the axle beam.
NOTE: Be careful not to damage the body.
...
CMP Pulse Plate Removal and Installation
Removal
Remove the air cleaner.
Remove the intake manifold chamber.
Disconnect the following engine wire harness connectors, and remove the
wire harness clamps ...