Honda Fit manuals

Honda Fit: Under-Cowl Panel Replacement

NOTE: Take care not to scratch the body.

  1. Remove these items:

    • Windshield wiper arms

    • Cowl cover

  1. Remove the bolts, then remove the under-cowl panel (A).

  2. 6 x 1.0 mm9.8 Nح(1.0 kgfح, 7.2 lbfئt)A
  3. Install the under-cowl panel in the reverse order of removal.

See also:

Output Shaft (Countershaft) Speed Sensor Replacement (M/T)
M/T Raise the vehicle on a lift. Disconnect the output shaft (countershaft) speed sensor connector (A). Remove the output shaft (countershaft) speed sensor (B). ...

Rocker Arm Assembly Removal
Remove the cylinder head cover. Loosen the rocker arm adjusting screws (A). Unscrew the rocker shaft mounting bolts two turns at a time in the sequence shown. ...

A/T Differential Carrier Bearing Preload Inspection (A/T)
Special Tools Required Driver Handle, 15 x 135L 07749-0010000 Bearing Driver Attachment, 72 x 75 mm 07746-0010600 Preload Inspection Tool 07HAJ-PK40201 NOTE: If the transmission housing, to ...

© 2026 Copyright www.hfitinfo.com