Honda Fit: Tailgate Handle Replacement
NOTE:
-
Put on gloves to protect your hands.
-
Take care not to scratch the tailgate or the related parts.
-
Remove these items:
-
Tailgate lower trim panel
-
Rear license trim
-
-
Disconnect the tailgate opener cable (A) from the tailgate handle (B), and remove the nuts. Take care not to kink the cable.
-
From outside of the tailgate, pull out the tailgate handle (A), then remove it.
-
Install the handle in the reverse order of removal, and note these items:
-
Make sure the tailgate opener cable is connected securely.
-
Make sure the tailgate opens properly.
-
See also:
A/T Countershaft Reverse Selector Hub Installation (A/T)
Special Tools Required
Driver Handle, 40 mm I.D. 07746-0030100
Install 1st gear, 2nd gear, 3rd gear, the 33.2 x 40 x 26 mm
collar, the 29 mm cotters, and the 33 x ...
As required by the FCC
1)This device complies with Part 15 of the
FCC Rules and Canadian RSS-210/RSSGen.
Operation is subject to the following
two conditions: (1) this device may not
cause harmful interference, and (2 ...
Information
This chapter includes your vehicle’s specifications, locations of
identification numbers, and other
information required by regulation. ...
Categories
