Honda Fit: Hood Latch Replacement
NOTE:
-
Put on gloves to protect your hands.
-
Take care not to scratch the body or related parts.
-
Remove the front grille cover.
-
Remove the clips, and release the hooks (A) from the body, then remove the hood latch cover (B).
-
For some models: Remove the clip (A), then disconnect and detach the hood latch switch connector (B).
-
Remove the bolts, then remove the hood latch (A) from the body.
-
Disconnect the hood opener cable (B) from the hood latch. Take care not to kink the cable.
-
Install the latch in the reverse order of removal, and note these items:
-
Apply multipurpose grease to each location of the hood latch indicated by the arrows.
-
Make sure the hood opener cable is connected properly and hood latch switch connector is plugged in properly (for some models).
-
Adjust the hood latch alignment.
-
Make sure the hood opens properly and locks securely.
-
See also:
Exterior Care
Dust off the vehicle body after you drive.
Regularly inspect your vehicle for scratches on painted surfaces. A scratch on a
painted surface can result in body rust. If you find a scratch, promptly ...
Display and Volume Settings
INFO button
► Setup
Use the Main Setup screen to adjust the display and volume.
Select or
to adjust the desired
item.
The following items are available:
• Brightness: Adjusts the s ...
Guidance Screen
...
Categories
