'11-13 models
NOTE:
Put on gloves to protect your hands.
Take care not to scratch the door.
Remove the door panel.
Disconnect the power door lock actuator connector, and detach the harness clips.
Remove the plastic cover, as needed.
Raise the glass fully.
Remove the clip securing the pad (A), and release the hooks (B), then remove it.
Install the pad in the reverse order of removal.
When installing the door panel, make sure the plastic cover is installed properly and sealed around its outside perimeter to seal out water.
Tires
To safely operate your vehicle, your tires must be the proper type and size,
in good condition with adequate tread, and correctly inflated.
The following pages give more detailed information on how ...
Front Seat Frame Replacement
Driver's Seat
Check the operation of the driver's seat position sensor after
any of these actions :
Driver's seat position sensor replacement
Cover plate (f ...
Under-Cowl Panel Replacement
NOTE: Take care not to scratch the body.
Remove these items:
Windshield wiper arms
Cowl cover
Remove the bolts, then remove the under-cowl panel ...