Remove the steering column covers.
Disconnect the 12P connector (A) from the combination light switch (B).
Turn the steering wheel to access the combination light switch screws (C).
Remove the two screws, then slide out the combination light switch.
Inspect the connector terminals to be sure they are all making good contact.
If the terminals are bent, loose or corroded, repair them as necessary, and recheck the system.
If the terminals look OK, check for continuity between the terminals in each switch position according to the tables.
If all the continuity is not as specified, remove the two screws and replace the switch.
Install the parts in the reverse order of removal.
Towing
If the vehicle needs to be towed, call a professional towing service. Never
tow the vehicle behind another vehicle with just a rope or chain. It is very
dangerous.
Emergency Towing -There are thr ...
Piston, Pin, and Connecting Rod Replacement
Special Tools Required
Pilot Pin 070AF-PWC0110
Piston Base 07973-6570500
Piston Base Spring 07973-6570600
Piston Base Head 07TGF-001000A
Pilot Collar, O.D. 18 mm 070AF-PWC0130
Insert Adj ...
Instrument Panel
* : If equipped ...