Honda Fit: Body

See also:

Driveshaft Installatio
NOTE: Before starting installation, make sure the mating surfaces of the joint and the splined section are clean. Apply about 5 g (0.18 oz) moly 60 paste (P/N 08734-0001) to the contact ar ...

Removal
Do the battery terminal disconnection procedure. Remove the drive belt. Remove the intake manifold. Disconnect the alternator connector (A) and the p ...

Windshield Washers
Check the fluid level in the windshield washer reservoir at least monthly during normal use. Check the fluid level by removing the cap and looking at the level gauge On Canadian models: The low ...