HandsFreeLink Control Unit Connector for Inputs and Outputs
Removal (Part -3)
Remove the secondary HO2S harness bracket (A) from the steering gearbox.
NOTE: Do not disconnect the secondary HO2S 4P connector and the secondary HO2S.
...
Alternator Reassembly
If you removed the pulley, put the rotor in the drive-end housing, then torque
its locknut to 110 N·m (11.2 kgf·m, 81 lbf·ft).
Remove any grease or any oil from the ...
Avoiding Streets
DEST button (when en route)
►Avoid Streets
Select a street or streets along your route to avoid.
1. Select the street you want to avoid.
► Repeat the procedure to avoid
other ...