Drive Belt Auto-Tensioner Pulley Replacement
Remove the auto-tensioner.
Remove the tensioner pulley.
Install the tensioner pulley in the reverse order of removal.
Install the auto-tensioner.
...
Transmission Side - Release Bearing Inspection
Check the play of the release bearing by spinning it by hand. If there is
excessive play or noise, replace the release bearing.
NOTE: The release bearing is packed with grease. Do not ...
Valve Inspection
Remove the valves.
Measure the valve in these areas.
Intake Valve Dimensions
A Standard (New):
27.85пјЌ28.15 mm (1.0965пјЌ1.108 ...