Grab Handle Removal/Installation
Special Tools Required
KTC Trim Tool Set SOJATP2014
*Available through the Acura Tool and Equipment Program; call
888-424-6857
NOTE: Use the appropriate tool from the KTC trim tool set ...
Alternator Reassembly
If you removed the pulley, put the rotor in the drive-end housing, then torque
its locknut to 110 N·m (11.2 kgf·m, 81 lbf·ft).
Remove any grease or any oil from the ...
Connecting Rod and Crankshaft End Play Inspection
Remove the oil pump.
Measure the connecting rod end play with a feeler gauge (A) between the
connecting rod (B) and the crankshaft (C).
Connecting Rod End Play
...