Side Impact Sensor (Second) Replacement
Removal
Do the battery terminal disconnection procedure,
then wait at least 3 minutes before starting work.
Remove the cargo area side trim.
Disconnect the side ...
Countershaft Inspection (M/T)
Inspect the gear and bearing contact areas for wear and damage, then
measure the countershaft at points A, B, and C. If any part of the
countershaft is less than the service limit, replace ...
Subframe Replacement
Front Subframe Torque
NOTE:
After loosening the subframe mounting bolts, be sure to replace them with
new ones.
Loosely install new front subframe mounting bolts, then tighten the b ...