Honda Fit: Taking Care of the Unexpected
This section covers the more common problems that motorists experience with their vehicles. It gives you information about how to safely evaluate the problem and what to do to correct it. If the problem has stranded you on the side of the road, you may be able to get going again.
If not, you will also find instructions on getting your vehicle towed.
- Compact Spare Tire
- Changing a Flat Tire
- If the Engine Won’t Start
- Jump Starting
- If the Engine Overheats
- Low Oil Pressure Indicator
- Charging System Indicator
- Malfunction Indicator Lamp
- Brake System Indicator
- Fuses
- Fuse Locations
- Emergency Towing
- If Your Vehicle Gets Stuck
See also:
Transmission Side - Release Bearing Inspection
Check the play of the release bearing by spinning it by hand. If there is
excessive play or noise, replace the release bearing.
NOTE: The release bearing is packed with grease. Do not ...
Installation
Install the damper rubber mount (A) onto the damper unit. Position the
damper assembly (B) between the body and the axle beam.
NOTE: Be careful not to damage the body.
...
Torque Converter Housing Lubrication Check Valve Replacement (A/T)
Remove the sealing bolt (A) and the sealing washer (B).
Remove the lubrication check valve (C) from the torque converter housing
(D).
Install the lubrication check val ...
Categories
