Honda Fit manuals

Honda Fit: Windshield Washers

Check the fluid level in the windshield washer reservoir at least monthly during normal use.

Check the fluid level by removing the cap and looking at the level gauge


Check the fluid level by removing the cap and looking at the level gauge

On Canadian models: The low washer level indicator comes on when the level is low.

Fill the reservoir with a good-quality windshield washer fluid. This increases the cleaning capability and prevents freezing in cold weather.

When you refill the reservoir, clean the edges of the windshield wiper blades with windshield washer fluid on a clean cloth. This will help to condition the blade edges.

Do not use engine antif reeze or a vinegar/water solution in the windshield


Do not use engine antif reeze or a vinegar/water solution in the windshield washer reservoir. Antif reeze can damage your vehicle’s paint, while a vinegar/water solution can damage the windshield washer pump. Use only commercially-available windshield washer f luid.

See also:

Installation (Part -1)
Before installing the steering gearbox, make sure that no grease is on the mating surface of the steering gearbox and the front subframe. To prevent the gearbox mounting bolts from looseni ...

Automatic Transmission
Release the parking brake. Start the engine. Shift to D, then to N. Turn off the engine. Leave the ignition switch in ACCESSORY (I) so the steering wheel does not ...

Receiving a Call
1. Press the (Pick-Up) button to answer a call and display the Calling screen. 2. Press the (Hang-Up) button to terminate the call. The following options are available during a call: â ...

© 2024 Copyright www.hfitinfo.com