Honda Fit: Maintenance
This section explains why it is important to keep your vehicle well maintained and how to follow basic maintenance safety precautions.
This section also includes instructions on how to read the maintenance minder messages on the information display, and instructions for simple maintenance tasks you may want to take care of yourself.
If you have the skills and tools to perform more complex maintenance tasks on your vehicle, you may want to purchase the service manual.
- Maintenance Safety
- Maintenance Minder
- Fluid Locations
- Adding Engine Oil
- Changing the Engine Oil and Filter
- Engine Coolant
- Windshield Washers
- Transmission Fluid
- Brake and Clutch Fluid
- Lights
- Cleaning the Seat Belts
- Floor Mats
- Audio Antenna
- Dust and Pollen Filter
- Wiper Blades
- Wheels
- Tires
- Checking the Battery
- Vehicle Storage
See also:
Alternator Reassembly
If you removed the pulley, put the rotor in the drive-end housing, then torque
its locknut to 110 N·m (11.2 kgf·m, 81 lbf·ft).
Remove any grease or any oil from the ...
Disassembly
Compress the damper spring, then remove the nut (A) while holding the
damper shaft with a hex wrench (B). Do not compress the damper spring more
than necessary to remove the nut.
...
Windshield Washers
Check the fluid level in the windshield washer reservoir at least monthly during
normal use.
Check the fluid level by removing the cap and looking at the level gauge
On Canadian models: The low ...
Categories
