Honda Fit manuals

Honda Fit: Preparing to Drive

You should do the following checks and adjustments before you drive your vehicle.

1. Make sure all windows, mirrors, and outside lights are clean and unobstructed. Remove frost, snow, or ice.

2. Check that the hood is fully closed.

3. Visually check the tires. If a tire looks low, use a gauge to check its pressure.

4. Check that any items you may be carrying are stored properly or fastened down securely.

5. Check the seat adjustment.

6. Check the adjustment of the inside and outside mirrors.

7. Check the steering wheel adjustment.

8. Make sure the doors and the tailgate are securely closed and locked.

9. Fasten your seat belt. Check that your passengers have fastened their seat belts.

10. When you start the engine, check the gauges and indicators in the instrument panel

See also:

Output Shaft (Countershaft) Speed Sensor Replacement (A/T)
Remove the air cleaner assembly. Disconnect the output shaft (countershaft) speed sensor connector, and remove the output shaft (countershaft) speed sensor (A). ...

Intermediate Shaft Removal (A/T)
Drain the transmission fluid. Reinstall the drain plug with a new sealing washer. Remove the right driveshaft. Remove the shift cable cover (A). Re ...

Evaporator Expansion Valve Replacement (With A/C)
Recover the refrigerant with a recovery/recycling/charging station. Remove the bolt from the A/C line clamp (A). @font-face{font-family: "H ...

© 2022 Copyright www.hfitinfo.com