Honda Fit: Before Driving
Before you begin driving your vehicle, you should know what gasoline to use and how to check the levels of important fluids. You also need to know how to properly store luggage or packages. The information in this section will help you. If you plan to add any accessories to your vehicle, please read the information in this section first.
- Break-in Period
- Fuel Recommendation
- Service Station Procedures
- Fuel Economy
- Accessories and Modifications
- Carrying Cargo
See also:
Block and Piston Inspection
Remove the crankshaft and the pistons.
Check the piston for distortion or cracks.
Measure the piston skirt diameter (A) at a point 16 mm (0.63 in)
from ...
Transmission Side - Release Bearing Inspection
Check the play of the release bearing by spinning it by hand. If there is
excessive play or noise, replace the release bearing.
NOTE: The release bearing is packed with grease. Do not ...
Parking Brake Lever Replacement
Release the parking brake lever fully.
Remove the center console.
Disconnect the parking brake switch connector (A) from the parking brake
switch (B).
...
Categories
