To apply the parking brake, pull the lever up fully. To release it, pull up slightly, push the button, and lower the lever. The parking brake indicator on the instrument panel should go out when the parking brake is fully released.
Driving the vehicle with the parking brake applied can damage the rear brakes and axles. A beeper will sound if the vehicle is driven with the parking brake on.
Rear Brake Hose Replacement
Raise and support the vehicle.
Remove the rear wheel.
Disconnect the brake hose (A) from the brake line (B) using a 10 mm flare-nut
wrench (C).
...
If the Engine Won’t Start
Diagnosing why the engine won’t start falls into two areas, depending on what
you hear when you turn the ignition switch to the START (III) position:
• You hear nothing, or almost nothing. The ...