Honda Fit: Tailgate
All models except Canadian DX
The tailgate will lock or unlock when you lock or unlock the driver’s door by using the key, the lock tab on the driver’s door, the master door lock switch or the remote transmitter (if equipped).
All models except S
You can lock or unlock the tailgate with the key.
To open the tailgate, pull the handle, then lift up.
To close the tailgate, hold the tailgate handle, lower the tailgate, then press down on the back edge.
Keep the tailgate closed at all times while driving to avoid damaging the tailgate and to prevent exhaust gas from getting into the interior.
Unlocking the Tailgate
On Sport model
If the power door lock system cannot unlock the tailgate, unlock it manually.
Place a cloth on the edge of the cover, then use a small flat-tipped screwdriver to remove the cover on the back of the tailgate.
Push the release lever to the right as shown.
If you need to unlock the tailgate manually, it means there is a problem with the tailgate. Have the vehicle checked by your dealer.
See also:
Park Pin Switch Replacement (A/T)
NOTE: The park pin switch is installed in the shift lever bracket base, and
not available separately from the shift lever bracket base; replace the park pin
switch and the shift lever bracket base ...
Vehicle
INFO button
► Setup ►Other
►Vehicle
Set the off-road tracking feature and correct the vehicle position displayed
on the
map.
Select an item.
The following items are availa ...
A/T Secondary Shaft Sealing Ring Replacement (A/T)
The sealing rings are synthetic resin with chamfered ends. Check the
condition of the sealing rings, and replace them only if they are worn,
distorted, or damaged.
For a better fit, squeeze ...
Categories
