Clock
Models without navigation system
You can adjust the time in the clock display, using the CLOCK button with the
ignition switch in ACCESSORY or ON
.
Models without navigation system
Press and hold the CLOCK button until the clock
display begins to blink, then press the
(Reset)
button.
Depending on the displayed time, the clock sets forward or backward.
Example:
1:06 will reset to 1:00
1:53 will reset to 2:00
Models with navigation system
The clock is automatically updated through the navigation system, so the time does not need to be adjusted.
■Adjusting the Time
1. Press and hold the CLOCK button until the clock display begins to blink.
2. Press the 1 (Hour) button to change the hours.
3. Press the 2 (Minute) button to change the minutes.
4. Press the CLOCK button to go back to the normal display.
Steering Gearbox Removal and Installation
Special Tools Required
Ball Joint Thread Protector, 14 mm 071AF-S3VA000
Ball Joint Thread Protector, 10 mm 07AAF-SECA120
Universal Lifting Eyelet 07AAK-SNAA120
1.8 Support Bolt 07AAK-SNAA500 ...
Update, Coverage, Map Errors
...
EVAP Canister Vent Shut Valve Replacement
Remove the EVAP canister assembly.
Remove the hose (A), and disconnect the EVAP canister vent shut valve
connector (B).
Remove the EVAP canister vent shut valv ...